Jump to a product:

Gasket Materials for Energy Control

Polytech Reticulated urethane foams from Polymer Technologies

Keeping gas, liquids and noise properly contained can be a challenge. To help increase your application efficiency and reduce acoustical leaks, we supply POLYTECH® gasket materials made from an array of polymers, including PVC, polyurethane, neoprene, silicone, and blends to meet your needs.

Our gasketing materials are suitable for use in a variety of industries including HVAC, power generation, mass transportation and medical, to name a few. Our expert team of engineers are ready to help you select the correct POLYTECH® gasket material to solve your energy management problem. Bring us your most complex issues, and we'll provide a solution to meet your project objectives.

Download Technical Data Sheets

POLYTECH® Vinyl Nitrile Foam (PVN)

POLYTECH® Vinyl Nitrile (PVN) is a Vinyl/Nitrile/Neoprene closed cell foam is designed for use as a gasket or seal in a variety of environments. It offers excellent resistance to gasoline and other aliphatic hydrocarbons.

POLYTECH® Vinyl Nitrile Foam (PVN) Return to top
  • Typical Density: 3-5 lb/ft³
  • Temperature Range: -40°F to +200°F
  • Flammability: UL94 V0 and UL94 HF-1

Applications typically include gaskets and seals in a variety of engine enclosures and equipment.

POLYTECH® High-Density Polyurethane Foam Grade (PHU)

POLYTECH® High-Density Polyurethane Foam Grade (PHU) is a low modulus open cell polyurethane foam. It behaves like a closed cell foam product when compressed and is an excellent gasket seal. This material has a significantly lower compression set than typical closed cell foam gaskets.

POLYTECH® High-Density Polyurethane Foam Grade (PHU) Return to top
  • Typical Density: 15 lb/ft³
  • Temperature Range: -45°F to +212°F
  • Flammability: UL94 HBF; FMVSS302

Applications typically include gaskets and seals around equipment doors as well as mounting and protective pads.

POLYTECH® Neoprene Blend Foam (PNB)

POLYTECH® Neoprene Blend Foam (PNB) is a Neoprene/EPDM/SBR closed cell blend foam with good resistance to weather, oxidation, and ozone. This is an economical closed cell foam for a variety of uses.

POLYTECH® Neoprene Blend Foam (PNB) Return to top
  • Typical Density: 5-7 lb/ft³
  • Temperature Range: -70°F to +200°F
  • Flammability: UL94HF1

Applications typically include gaskets and seals in a variety of engine enclosures and equipment.

POLYDAMP® Low Permeability Foam (LP-18)

POLYDAMP® Low Permeability Foam (LP-18) is a soft, ether-based polyurethane foam with low permeability but quick recovery. It is an excellent low-cost alternative to traditional closed cell foams in applications where moisture and air need to be retained.

POLYDAMP Low Permeability Foam (LP-18) Return to top
  • Density: 2lb/ft³
  • Temperature Range: -40°F to +225°F
  • Meets impermeability tests – Ford B0112-03 and GM6068M

Applications typically include radiator seals and various gasketing applications within an engine environment.

POLYTECH® Silicone Foam grade 800 or 1000 (PSL)

POLYTECH® Silicone Foam grade 800 or 1000 (PSL)is a soft cellular silicone foam that is extremely resilient to mechanical fatigue and has high compression set resistance. It also has Excellent Flame Spread and Smoke Density values.

POLYTECH® Silicone Foam grade 800 or 1000 Return to top
  • Density: 800 grade - 20lb/ft³; 1000 grade - 12lb/ft³
  • Temperature Range: -67°F to +392°F
  • Flammability: UL94 V0; UL94 HF-1

Applications typically include transportation, medical and other highly demanding applications.

Sometimes a complex problems requires an out-of-the-box solution.

We will work with you to develop custom gasket materials to meet your needs.

Contact us today for your custom solution.

Contact Us

Polymer Technologies, Inc. 2023. All Rights Reserved. Online Marketing by MilesTechnologies.com. Sitemap.